Why is my grinder stuck in grinders? This happens to me all the time. I take great pride in owning a very sharp and durable coffee grinder. However, there are some simple coffee tips that I use that help to keep my grinder from grinding to dust.
My grinder stuck in grinders is an automatic one. It gets stuck because the suction on the lid takes effect and causes the coffee to stick in the crud. Always open the back, especially if the bottom has completely shut. All coffee grounds stuck inside the crud chamber of the grinder.
Another simple coffee tips that help to prevent grinder stuck in grinders is to always boil milk prior to using. I use this simple tip every single time. Many brands of coffee grinders use the metal kief in boiling milk. When using freshly purchased kief always rinse off the kids with cool boiled water. This will prevent the coffee concentrate from sticking inside the kief.
One more tip that helps to prevent this problem is when making coffee it is always better to boil the milk before using. Boiling milk helps to loosen the ground particles that are stuck in your grinder. If you prefer not to boil your milk, you can also use the water from boiled water. Just be sure to stir it well first to allow any sediment to be cleaned away.
Another simple tip that will help you fix this problem is to place your stainless steel key catcher after grinding. After the coffee is ground, use a damp cloth to remove any sediment. Then you simply place the coffee grinder over the life catcher and turn it on. Overtime sediment builds up against the kief catcher. If you have a heavy coffee maker, this can be an issue as the coffee tends to build up in the machine over time.
To clean your coffee grinder, use some isopropyl alcohol and a scrub brush to take off the rust and scale that are stuck to the inside of your kief catcher. Once you have removed the scale and rust you can clean the rest of the grinder with the isopropyl alcohol. Be careful not to burn yourself when doing this, so use a clean cloth or rag. When removing the key catcher, it is important to be careful not to damage the inside of the kief catcher.
My next problem was with the electric grinder boil away. It would not grind well, took too long to boil and the electric feature just seemed to be a pain. I tried boiling a half pint of coffee one time, and it did a decent job. After I replaced the electric motor with the old one, things were back to normal.
The final problem I faced when learning why is my grinder stuck? I found that sometimes, when I added hot water to the coffee, it would splatter. My solution to this was pretty easy, but it did take a lot of extra thought on my end. You can add a teaspoon of coffee grounds to each cup of water. I also found that adding a tablespoon of baking soda solved this problem for me.
As you can see from all of my troubles, the biggest problem was the kief catcher. When I removed it from the coffee maker, I noticed that it was a little bit too loose. I decided to tighten it up before placing it back in the machine. To tighten it, all I did was stick a screwdriver in the hole, turned it in a circle, and then cranked it a full revolution. That did the trick.
When I tried to brew coffee again, I noticed that it tasted OK. It was not as bad as I thought it was going to be, but I will definitely be looking into getting the kief catcher replaced soon. If you are having the same problem, be sure to check and see if there is a more suitable coffee maker. Your local home improvement store should have kettles and grinders for a reasonable price.
Overall, I think you need to call in a professional to look at your coffee grinder to see why is your grinder stuck? If you want to save some money and not spend the money on a new coffee grinder, you can always try to change the filter between each coffee that you brew. This should fix your problem, but be careful. You don’t want to mess with the internal parts of your grinder when it is still pretty new. Call in a pro to change the filter for you.